There are several types and dozens of brands of
There are several types and dozens of brands of audio cables. The choice depends on what one wants to hook up and how concerned one is about sound quality. Generally speaking, 5-7% of the total system cost is considered adequate to be invested in cables. If one’s just listening to background music, news shows, etc., or if sound quality isn’t all that important, one can use practically any cable - even the cheap ones that come packaged with many audio components.
For those who are more serious about listening, and want to go for better sound quality, there are affordable offerings from cable specialists. These cables are designed for optimum sound quality, and are also much sturdier than generic cables. One can also spend several hundred dollars for a pair of speaker cables or analog audio interconnects. It’s tough to make the case that the sonic benefits of these cables merit such a lavish expenditure, but the true audio elite may find that the pride in owning the very best is worth the sacrifice.
Analog audio cables, audio video cables, audio speaker cable and digital cables are the four basic types of cables that can be used to transfer sound. These cables transfer the audio signal from point A to point B unaltered. You control the amount of Resistance, Inductance, and Capacitance thereby minimizing losses at audio frequencies.
To pass analogue line level audio signal between componets, RCA connections are employed. RCA audio cables are joined in stereo couples, with a connection for the right channel and one for the right channel of audio. For line level analogue connections it is a good idea to employ cables which have low capacitance and properly shielded to avoid interferences and external noises from getting to mix to the signal.
Video Cables are possibly the most important as the signal that is passed through is at a very high frequency. As the frequency increases it becomes more critical to ensure adequate shielding, solid terminations and proper impedance that audio video cables provide. Therefore it is necessary for a video cable to be adequately shielded and maintain characteristic impedance.
Audio speaker cables are normally quite thick and have two wires: they may be tipped using spade lugs, banana plug or simply bare wires. It is required to be sure that the connections are really tight to the amplifier and the loudspeakers to reduce contact resistance to a minimum. You should never forget to keep the speaker cables as short as possible and avoid looping cables too much since this may augment cable inductance slightly.
Audio cables come in two different types and are usually a single cable. The first type is an optical cable; it transmits digital audio signals as pulses of light. The second form is coaxial cables look like standard analog cables, but what they do is transfer digital audio signals.
Good quality audio cables generally cost around 7% of the total audio system cost and can be chosen from several brands. They can be categorized as analog cables, audio video cables, audio speaker cables and digital cables. Analog cable uses RCA connectors that come in stereo pairs for left and right channels. Video cable carries signals at a very high frequency while speaker cables are generally thicker and have two wires. They should connect to speakers and amplifiers with least contact resistance and should be as short as possible. Digital cables can be either optical or coaxial and carry audio signals in digital form.
